Hangzhou Newtech Machinery Co.,Ltd
Product Categories
Home > Exhibition > Content

Milling elements and applications

Hangzhou Newtech Machinery Co.,Ltd | Updated: Jan 09, 2017

Milling is the most commonly used method of machining, processing in the course of air travel, so efficiency is higher than planing. Milling, milling cutter rotation is a main motion, workpiece does not move. Milling elements, including:

① the milling speed v (m/min): v= PI *Don, where do the milling cutter diameter (mm), n for milling cutter speed (r/min>?

Secondly, turn the feed rate f: milling cutter rotating one-week intervals, displacement of the workpiece relative to the cutter.

③ feed reset AF: milling cutter rotating within the interval of a tooth, displacement of the workpiece relative to the cutter-view. Af=flz, where z is the cutter teeth.

④ feed per minute VF (mm/min): per minute workpiece displacement relative to the milling cutter,

⑤ AP milling depth: thickness of cutting parallel to the axis of the cutter.

⑥ cutting width of public errand of AW: thickness of cut perpendicular to the axis of the cutter.

A wide range of milling applications, not only can milling, can complete the Groove, spherical, cam, the spiral groove, surfaces and surface processing.

Contact Us
Hangzhou Newtech Machinery Co.,Ltd
Tel: +8613758116419      Fax:+86-571-23206307
Copyright © Hangzhou Newtech Machinery Co.,Ltd