Hangzhou Newtech Machinery Co.,Ltd
Product Categories
News
Home > News > Content

Drinking Straw Packing Machine Features And Precautions

Hangzhou Newtech Machinery Co.,Ltd | Updated: May 19, 2017

 Drinking Straw Packing Machine The PLC can be programmed to control the system operation, can achieve the powder, granules, water and viscous liquid filling conversion; is a specifically for the molding bag of automatic packaging machine. Is the best molding bag bag filling machine.

 Drinking Straw Packing Machine Features:

1, into and out of material: forward and right style

2, beverage packaging machine using hot box fixed instantaneous heating, saving energy

3, special electric arrangement, heat distribution evenly.

4, the body compact, small footprint

5, suitable for small batch production and in the amount of production. Can be used with the assembly line to improve the efficiency of the beverage packaging machine

6, using Taiwan, Japan, South Korea imported original parts, stable and reliable performance

  Drinking Straw Packing Machine Technical Parameters:

5. Filling error: ≤ ± 1%

6. Production speed: 20-60 bags / minute

7. Air consumption: 0.6 m3 / min

8. Dimension: 3000mm × 1100mm × 2050mm

9. Machine weight: 900 kg

Drinking Straw Packing Machine Troubleshooting:

Electromagnet does not pull, causing the cause of this failure is mostly the host internal fault, solenoid coil blown, line interruption and other reasons, the solution is: first check whether the host internal or external problems; Electromagnet insurance tube, see whether there is signs of electromagnet, excluding mechanical jam, in all cases are normal detection of internal power supply; weighing machine often encountered in the cause of this failure is due to: sensor damage, For bridge voltage fault, line connection or interrupt is wrong, the exclusion method is: detection sensor and connection or host load signal, and near the detection bridge and amplifier circuit or computer output display circuit, and sometimes system stability Bad cause damage to the bag to solve this problem can test whether the fault line, or remove the host, through the internal shorting to apply a clear signal to determine the fault is located in the machine or from the switch, and then solve the problem.


Contact Us
Hangzhou Newtech Machinery Co.,Ltd
Address: W-15,NO.1707,WENJU STREET, FUYANG, HANGZHOU, ZHEJIANG,CHINA.
Tel: +8613758116419      Fax:+86-571-23206307
E-mail:sales@hzsmachinery.com
Copyright © Hangzhou Newtech Machinery Co.,Ltd